Cover Image

Influence of Spindle Speed on Drilling‐Induced Delamination and Hole Quality in 3D ‐Printed ONYX /Glass Fiber Composite Laminates: An Experimental and FEA Approach

Fuente: Wiley Open Access

Saved in:

Bibliographic Details
Main Authors:	Pankaj Kumar, Syed Shah Hussain, Manowar Hussain, Jay Prakash Srivastava, Sukumar Dhanapalan, R. Gobinath
Format:	Artículo Open Access
Published:	Wiley 2025
Subjects:	Polymer Composites
Online Access:	Acceder al recurso
Tags:	Add Tag No Tags, Be the first to tag this record!

Similar Items

Experimental and Numerical Investigation of Impact‐Induced Delamination in E‐Glass/Epoxy Laminated Composites Under Artificial Marine Environment
by: Pankaj Eknath Rawool, et al.
Published: (2026)

Inducing in Situ Delamination Monitoring With Enhanced Fracture Toughness in Fiber‐Metal Laminates Using Carbon Nanotubes
by: Vinay Kumar, et al.
Published: (2025)

Load‐Bearing Capacity and Failure Mode of L‐Shaped Laminates: The Role of Delamination Defect Location and Fiber Bridging
by: Dongfeng Cao, et al.
Published: (2025)

Multiscale Interfacial Engineering Coupled With Controlled Crystallization Dramatically Improves Delamination Resistance of Thermoplastic Fiber Metal Laminates
by: Wenjun Fang, et al.
Published: (2026)

The Influence of CNF / SiO 2 / SCF Additives on Interlaminar Toughening of Glass Fiber/Epoxy Laminates
by: Bin Hu, et al.
Published: (2025)

Logistic Mapping Multi‐Layer Extreme Learning Machine‐Based Delamination Prediction Method for Carbon Fiber‐Reinforced Plastic Drilling
by: Wenli Yao, et al.
Published: (2026)

Mechanical Performance of Novel Natural/Glass Fiber Blend for Reinforcing Metal Laminates
by: Shuo Wang, et al.
Published: (2026)

Impact Behavior and Damage Mechanisms of CFRP Laminates Containing Manufacturing‐Induced Delamination Defects
by: Zhongyu Li, et al.
Published: (2025)

Fracture Toughness Gain Through Artificial Fiber Bridging in Needle‐Punching Glass Fiber/Epoxy Woven Laminates
by: Galina Forental, et al.
Published: (2026)

Dual Nano‐Reinforcement Approach for Optimizing Tensile Performance in Glass Fiber‐Reinforced Epoxy Laminates
by: Mahmoud M. Awd Allah, et al.
Published: (2026)

Effects of Fiber Length and Printing Speed on the Mechanical Properties of 3D Printed Carbon Fiber—Reinforced Polylactide Composites
by: Weijian Zhang, et al.
Published: (2025)

A Multi‐View Analysis on the Longitudinal Half Fixed Beam Method for Mode III Delamination of Composite Laminates
by: Wenjuan Lin, et al.
Published: (2025)

Damage Evolution Analysis of Seawater Aged Glass Fiber‐ MWCNT /Epoxy Laminates Through Acoustic Emission and Piezoresistivity
by: Carlos Rubio‐González, et al.
Published: (2025)

Influence of Metal Layers on the Mechanical Properties of Carbon‐Fiber Epoxy Laminates: An Experimental Investigation
by: Mohammed Jamsheed, et al.
Published: (2025)

Temperature Field and Thermal Damage Analysis of Glass Fiber/Epoxy Resin Laminated Plates Under Unilateral Heating Conditions
by: Guotao Chen, et al.
Published: (2025)

Size Effects on the Three‐Point Bending and Energy Absorption Performance of Pseudo‐Ductile Carbon/Glass Fiber Hybrid Laminates
by: Yinyuan Huang, et al.
Published: (2025)

Comparing the In‐Plane Shear Behavior of Glass Fiber‐Reinforced and Carbon Fiber‐Reinforced Polymer Laminates With the Same Epoxy Matrix System in ±45° Tensile Tests
by: Maria Gfrerrer, et al.
Published: (2026)

A Gaussian Process Regression‐Based Multi‐Path Guided Wave Fusion Strategy for Delamination Evolution Tracking in Composite Laminates
by: Hong Zhang, et al.
Published: (2026)

Characterizing Intralaminar Distal Crack and Delamination in Multidirectional Laminates Under Low Velocity Impact: Modeling Approach With Ultrasound Testing Validation
by: Niildiip Chandraa, et al.
Published: (2025)

Influence of Printing Parameters and Paths on Warpage in 3D Printing of Continuous Carbon Fiber Composites
by: Jianming Zhou, et al.
Published: (2025)

Effect of Fiber Orientation on the Properties of Continuous Glass Fiber Reinforced PLA Composites Produced via Nozzle‐Impregnation 3D Printing
by: Ahmet Cagri Kilinc, et al.
Published: (2025)

Low‐Velocity Impact Response and Damage Mechanisms of 3D Printed ASA‐Glass Fiber Composites
by: Sachini Wickramasinghe, et al.
Published: (2026)

Fiber Path Optimization for Strength Enhancement and Damage Control in Open‐Hole Fiber‐Reinforced Laminates
by: Feng Zhang, et al.
Published: (2025)

Modeling and Analysis of Low Velocity Impact Damage in Carbon Fiber Laminates
by: S. Adhityan, et al.
Published: (2026)

Influences of Hygrothermal Aging on Low‐Velocity Impact Damage Characteristics of Carbon Fiber Reinforced Composite Laminates: An Experimental and Numerical Study
by: Haiyang Li, et al.
Published: (2025)

Delamination of MXene using biomolecule: An effective strategy toward the utilization of delaminated MXene as fillers in polymer composites
by: Akhila Raman, et al.
Published: (2024)

Cyclic Compression Properties of High‐Strength, Recoverable, Light‐Curable 4D Printing Materials Reinforced With Glass Fibers
by: Youlong Wang, et al.
Published: (2025)

Print Process Optimization and Viscoelastic Characterization of Vat‐Photopolymerized Glass Fiber‐Reinforced Composites via Experimental and Predictive Modeling
by: Annada Prasad Moharana, et al.
Published: (2026)

Mode‐I Fracture Behavior of Carbon Fiber/Epoxy Composites Toughened Using 3D ‐Printed Polypropylene Grid Structures With Chopped Glass and Carbon Fibers
by: Hayriye Elif Delibaş, et al.
Published: (2025)

Mode‐ II Fracture and Residual Flexural Strength of MWCNT Modified E‐Glass/Epoxy Laminates
by: Coşkun Yildiz, et al.
Published: (2025)

Validating a Hashin‐Based Shell Model for LVI of Woven E‐Glass/Epoxy Laminates
by: Mehmet İskender Özsoy, et al.
Published: (2026)

Inverse Optimization of Failure Parameters of Carbon Fiber Laminates Under Low‐Velocity Impact
by: Shuguang Yao, et al.
Published: (2026)

Modeling Flow‐Deformation Coupling to Predict Fiber Deformation During the Continuous Lamination of Organosheets
by: Lingyu Yue, et al.
Published: (2026)

Influence Mechanism of Constituent Materials on the Interlaminar Fracture Properties of Composite Laminates
by: Tianjiao Li, et al.
Published: (2025)

Deformation Behavior and Mechanical Properties of Continuous Fiber Reinforced Thermoplastic Composite Laminates in Integrated Overmolding
by: Qihui Ying, et al.
Published: (2025)

Tensile Deformation Law and Scale Effect of Low‐Constraint Ultra‐Thin Fiber Metal Laminates
by: Yanfeng Zhang, et al.
Published: (2025)

Experimental Study on Anchoring Performance of Wedge Anchorage for Prestressed Basalt Fiber‐Reinforced Plastics Laminates
by: Xinquan Chang, et al.
Published: (2025)

Experimental Investigation of Low‐Velocity Impact on Glass‐Basalt Hybrid Laminates: Effect of Ply Sequence and Energy Levels
by: Chandreshkumar Vyas, et al.
Published: (2025)

Influence of Fiber Layer Stacking, Annealing at Different Pressures and Fiber Volume Fraction on Flexural Mechanical Properties of 3D Printed Reinforced Composites
by: Zeeshan Ali, et al.
Published: (2026)

Research on the Mechanical Properties and Process Parameters of High‐Speed FDM Printed PLA Components Reinforced With Continuous Carbon Fiber/Epoxy Resin Pins
by: Yonghao Lei, et al.
Published: (2025)