Buchumschlag

Design of Water‐Based Sizing Agent Based on Polyamide Containing Hydrophilic and Hydrophobic Segments and Its Effect on Interfacial Properties of CF / PA612 Composites

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Chenrong Yang, Enmao Zhang, Wenqi Zhao, Yuxi Pan, Xigao Jian, Cheng Liu
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2026
Schlagworte:	Polymer Composites
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Effects of Emulsifiers on the Thermal Stability of Thermoplastic Sizing Agents and the Interfacial Properties of CF / PEEK Composites
von: Zixuan Liu, et al.
Veröffentlicht: (2026)

Multistep Solution Impregnation: An Innovative Strategy to Enhance the Mechanical Properties of Carbon Fiber‐Reinforced Soluble Polyarylether Composites
von: Wenhui Zhou, et al.
Veröffentlicht: (2025)

Bio‐Based Hyperbranched Polyurethane Sizing Agent With Self‐Catalytic Function for Improving the Mechanical Properties of Carbon Fiber/ PA6 Composites
von: Xuyang Li, et al.
Veröffentlicht: (2026)

CF ‐Reinforced Advanced Composites Using Polyamide‐Imide (PAI) Matrices Synthesized via the Ester‐Acid Method
von: Mustafa Çakir, et al.
Veröffentlicht: (2026)

Enhanced Tribological Properties of PBO /Polyimide Composites Containing GO Interfacial Phase
von: Liang Yu, et al.
Veröffentlicht: (2025)

Resveratrol‐Based Waterborne Non‐Isocyanate Polyurethane Sizing Agent for Enhancing Interfacial Bonding of Carbon Fiber Composites
von: Hao Liu, et al.
Veröffentlicht: (2025)

Enhancing Interfacial Adhesion Between Copper Mesh Heating Element and Polyamide 66 in Induction Welding of Carbon Fiber/Polyamide 66 Composites via Ozone Treatment
von: Tenghui He, et al.
Veröffentlicht: (2025)

Influence of Matrix Composition and MWCNT Incorporation on the Fracture and Failure Behavior of Polyamide‐Based Self‐Reinforced Composites
von: T. Arnal, et al.
Veröffentlicht: (2026)

Dual‐Scale Synergistic Surface Modification of Carbon Fiber Fabric for Enhanced Interfacial Bonding and Mechanical Properties of PA6 Composites
von: Hui Fang, et al.
Veröffentlicht: (2026)

The Analysis of Joint Failure Mode and Effects of Ultrasonic Welding Parameters on the Mechanical Properties of CF / PEEK Composite Joints
von: Jing Wang, et al.
Veröffentlicht: (2026)

Effective Construction of Functional Interfaces for CF Composites Based on In Situ Growth Technology
von: Jingyu Ma, et al.
Veröffentlicht: (2026)

Anhydride and Alkoxysilane Functionalized Linear Low‐Density Polyethylene Compatibilized Polyamide/Carbon Fiber Composites With Excellent Mechanical and Tribological Properties
von: Zhang Li, et al.
Veröffentlicht: (2026)

Interface Design Strategy for Improving Interfacial Properties and Achieving Interfacial Self‐Healing Capabilities in Carbon Fiber Composites Based on the Introduction of ZIF8 and Diels–Alder Adducts
von: Weiyao Zhu, et al.
Veröffentlicht: (2025)

Effects of Polyamide‐6 Bulk Plasma Treatment on Morphology, Crystallinity and Mechanical Properties of Microfibrillar Composites
von: Nam Kyeun Kim, et al.
Veröffentlicht: (2026)

Bio‐Resveratrol‐Based Epoxy Resin to Improve the Interfacial Bonding Properties of Carbon Fiber/Epoxy Composites
von: Hu Jiang, et al.
Veröffentlicht: (2025)

Interfacial and Optical Properties of Plasma‐Modified Optically Transparent Composites With Sandwich‐Structure Based on Waste Textiles
von: Tianxiang Ren, et al.
Veröffentlicht: (2025)

Investigation of ultrasonic welding of CF/PA66 using nylon mesh energy directors
von: Ruoya Shi, et al.
Veröffentlicht: (2024)

Reactive Ionic Liquid‐Modified Bio‐Based Waterborne Polyurethane Sizing for Improved Interfacial Compatibility in Carbon Fiber/Epoxy Composites
von: Mingxuan Yu, et al.
Veröffentlicht: (2026)

Tailoring Interfaces and Networks in Functionalized Graphene‐Carbon Fiber Reinforced Polyamide Composites for Enhanced Thermal and Mechanical Properties
von: Xiaohui Yang, et al.
Veröffentlicht: (2025)

Bio‐Silica Reinforced Cardanol‐Vanillin Based Polybenzoxazine Composites for Thermal, Hydrophobic and Corrosion Resistant Applications
von: M Selvi, et al.
Veröffentlicht: (2025)

Effects of Process Parameters on Anisotropic Mechanical Properties of 3D Printed Short Carbon Fiber‐Reinforced Polyamide Composites
von: Minghui Zhang, et al.
Veröffentlicht: (2026)

The effects of temperature and hygrothermal aging on the properties of CF/PA6 composite and its compression failure mechanisms
von: Mingming Yu, et al.
Veröffentlicht: (2024)

Preparation and Properties of In Situ Polymerized Polyphenylene Sulfide‐Based Microwave Absorbing Composites
von: Jiachun Zhong, et al.
Veröffentlicht: (2025)

Enhanced Interfacial Strength in Carbon Fiber Composites via Mussel‐Inspired Sizing Polymers
von: Yalcin Meraki, et al.
Veröffentlicht: (2025)

Tribological Performance of Short Carbon Fiber Reinforced Polyphthalazine Ether Ketone Composites: Experimental and Molecular Dynamics Insights
von: Qingguang Bao, et al.
Veröffentlicht: (2025)

Design of Experiments‐Based Optimization of Manufacturing Parameters to Improve the Properties of GFRPP Composite Rebars
von: Ping Zhou, et al.
Veröffentlicht: (2025)

Improved Flexural Properties of Carbon Fiber‐Reinforced Polyamide Composites for Type IV and V Hydrogen Storage Vessels Utilizing Graphene Nanoplatelets
von: Jonghyun Eun, et al.
Veröffentlicht: (2025)

Effect of Boron Nitride on Mechanical and Thermal Properties of PA6+GF/hBN Composites
von: Alejandro Garza‐Santibañez, et al.
Veröffentlicht: (2025)

A new mechanism of mechanical reinforcement for 3D printing CF/PA12 composite based on microwave treatment
von: Huifang Zhang, et al.
Veröffentlicht: (2024)

Three‐Dimensional Network Structured CF ‐ CNTs / PDMS ‐ MXene Flexible Composites With Thermal Property and Electromagnetic Shielding Performance
von: Beibei Wang, et al.
Veröffentlicht: (2026)

Influence of Particulate Size on the Properties of Epoxy Composites Filled With Micro‐Sized Red Stone Dust
von: Aarti Dholi, et al.
Veröffentlicht: (2025)

Enhancing the Mechanical Properties and Forming Efficiency of Fused Granular Fabricated PETG ‐ CF Composites via Process Optimization and Heat Treatment
von: Baolin Liu, et al.
Veröffentlicht: (2025)

Enhancing the Interfacial Performance of Composites via the Construction of a Multiscale Rigid‐Flexible Interfacial Layer on Carbon Fiber Surfaces
von: Meili Zhang, et al.
Veröffentlicht: (2025)

Multidimensional Investigation of ILSS and Compressive Strength of CF ‐Reinforced Epoxy Composites
von: Qingchao Li, et al.
Veröffentlicht: (2026)

Constructing Multiscale Interfaces With External Flexibility and Internal Rigidity in Carbon Fiber Composites: A MOF ‐On‐ MXene In Situ Growth Approach
von: Qingfeng Sun, et al.
Veröffentlicht: (2026)

Improving the Mechanical Properties and Ultraviolet Aging Resistance of Bamboo‐Based Fiber Composites Using Titanium Dioxide Nanoparticles
von: Saiyu Ren, et al.
Veröffentlicht: (2025)

Stabilizing Fly Ash in Epoxy Composites via Reaction‐Induced Phase Separation: Interfacial Engineering for High‐Performance Multifunctional Materials
von: Junbo Wang, et al.
Veröffentlicht: (2026)

Thermal Management and Mechanical Properties of Epoxy‐Sandwich Composites Containing Microencapsulated Phase Change Material
von: Laura Simonini, et al.
Veröffentlicht: (2026)

Enhanced Interfacial and Tribological Properties of Polyether Ether Ketone Composites by the Addition of Modified Carbon Fibers
von: Mingjin Tang, et al.
Veröffentlicht: (2025)

Influence of Fiber Surface Treatment on the Elevated Temperature Interfacial Properties of Fiber‐Reinforced Phthalonitrile Composites
von: Bing Han, et al.
Veröffentlicht: (2026)