Buchumschlag

Creep Behavior and Fracture Mechanisms of the Dissimilar Inertia Friction Welded Joints of Deformed and Powder Metallurgy Ni‐Based Superalloys

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Zixin Zhang, Qiang Zhao, Xiaoguang Li, Rui Zhan, Chunbo Zhang, Feng Qin, Hang Liang, Lei Cui, Yongchang Liu
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2024
Schlagworte:	Fatigue & Fracture of Engineering Materials & Structures
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

In Situ Observation via Active Infrared Thermography for Fatigue Damage of Dissimilar Heat‐Welded Joints by Friction Stir Spot Welding
von: Yuki Ogawa, et al.
Veröffentlicht: (2025)

Fatigue Behavior of Al/Steel Dissimilar Friction Stir Welds and the Effect of Die‐Press Forming
von: Yoshihiko Uematsu, et al.
Veröffentlicht: (2024)

Investigation of Crystallographic Influences on Small Fatigue Crack Growth in Powder Metallurgy Superalloy FGH96
von: Guo Li, et al.
Veröffentlicht: (2025)

Clarification of Fatigue Fracture Mechanism on Overlap Friction Stir Welding (FSW) Joints of A5052 Aluminum Alloys
von: Jinta Arakawa, et al.
Veröffentlicht: (2025)

Mode‐I Fracture Characterization of Friction Lap–Welded Aluminum–to–Glass Fiber–Reinforced Polymer Hybrid Joints
von: Mahdi Sahranavard, et al.
Veröffentlicht: (2025)

Research on Creep–Fatigue Interaction and Constitutive Model of Micro Sampling of Superalloy Blades
von: Xuguang Zheng, et al.
Veröffentlicht: (2025)

Review on Optimization of Tensile, Fatigue, and Creep Properties of Additive Manufactured Nickel‐Based Superalloys by Modifying the Microstructure and Residual Stress
von: Xinming Lei, et al.
Veröffentlicht: (2025)

Multiaxial Creep Rupture Life Evaluation for Austenitic Stainless Steels Using Weld‐Type Miniature Cruciform Specimen
von: Noritake Hiyoshi, et al.
Veröffentlicht: (2026)

Microstructure Evolution and Damage Mechanisms of Inconel 718 Superalloy After Overloading Under Hybrid Stress–Strain Controlled Creep‐Fatigue Loading
von: Zitong Kang, et al.
Veröffentlicht: (2025)

Influences of Welding Techniques on Fatigue Behaviors of Thick‐Walled Cylinders of 30CrMnSiNi2A Steel
von: Jian Long, et al.
Veröffentlicht: (2025)

Experimental Research on the Fatigue Behavior of GH4169 Superalloy Containing Artificial White Spot Defects
von: Guo Li, et al.
Veröffentlicht: (2026)

Fatigue Behavior Up to Very High Cycle Regime of Laser Beam Welded Ti60 Joints
von: Lisha Ren, et al.
Veröffentlicht: (2025)

Effect of Shaped Film Cooling Hole Manufacturing Defects on the High‐Cycle Fatigue Behavior of a Ni‐Based Single‐Crystal Superalloy
von: Yue Wang, et al.
Veröffentlicht: (2025)

HCF Prediction of a Ni‐Based SX Superalloy Considering Multiple Factors at Elevated Temperatures by a PINN Approach
von: Jingyi Wang, et al.
Veröffentlicht: (2026)

The Characterization of High Temperature, High‐Cycle Fatigue Behavior of a Nickel‐Based Superalloy
von: Zhaolong Liu, et al.
Veröffentlicht: (2026)

Deformation and Damage Mechanisms of 316L Stainless Steel Under Various Dwell Times and Modes of Creep‐Thermomechanical Fatigue Interaction
von: Peng Yin, et al.
Veröffentlicht: (2026)

An Engineering Prediction Model on Fatigue Life of Welded Joints Under Cavitation Water Peening Treatment
von: Yun Luo, et al.
Veröffentlicht: (2026)

VHCF Failure Analysis and Life Prediction of Ni‐Based Superalloy Under Different Temperatures and Stress Ratios
von: Hui Pan, et al.
Veröffentlicht: (2025)

In Situ Observation of Small Crack Growth and Fatigue Life Modeling for In713C Ni‐Based Superalloy
von: Xiao‐Long Li, et al.
Veröffentlicht: (2025)

The Influence of a Sudden Impact Loading on the Creep, Damage, and Fracture of Beams Made From Functionally Graded Materials
von: Dmytro Breslavsky, et al.
Veröffentlicht: (2024)

A PINN–XGBoost Hybrid Model for High‐Cycle Fatigue Life Prediction of Mg Alloy Welded Joints
von: Haili Sun, et al.
Veröffentlicht: (2026)

In‐Service Inspection Optimization for Pressurized Water Reactor Primary Piping Weld Based on Probabilistic Fracture Mechanics
von: Zhenshun Liu, et al.
Veröffentlicht: (2025)

Effect of Crack Closure‐Dependent Residual Stress on Fatigue Crack Growth of Welded Joints Pertinent to Applied Minimum Stress Intensity
von: Shuai Luan, et al.
Veröffentlicht: (2026)

Creep Constitutive Model of Rock Considering Gradient Damage
von: Shuguang Zhang, et al.
Veröffentlicht: (2026)

An Investigation on Fatigue Strengthening Mechanism of 316L Stainless Steel Welded Joint by Surface Mechanical Rolling Treatment
von: Weiya Jin, et al.
Veröffentlicht: (2025)

Strain‐Controlled Low‐Cycle Fatigue Behavior of a Superalloy Considering Extensive Temperature Range and Stress Concentration
von: Lingying Luo, et al.
Veröffentlicht: (2024)

Strengthening–Weakening Coupled Rheological Model for Sandstone Based on Cyclic Loading–Unloading Creep Experiments
von: Zhi‐Cheng Liang, et al.
Veröffentlicht: (2025)

Discrete Element Simulation on Mechanical Behavior and Fracture Evolution Mechanism of Regular Joint Rock Under Triaxial Compression
von: Yi‐Ling Hua, et al.
Veröffentlicht: (2025)

Effect of Welding, Aging, and Stress Ratio on Fatigue of GMAW and FSW AA 6061‐T651 Joints
von: Hemendra Kumar Srivastava, et al.
Veröffentlicht: (2026)

Quantitative Review of Critical Plane Criteria and Stress Analysis Approaches for Multiaxial Fatigue of Welded Joints
von: Chin Tze Ng, et al.
Veröffentlicht: (2025)

Numerical Verification of Stress Intensity Factors at Semielliptical Surface Cracks at the Weld Toe of Cruciform Joints
von: Dorina Siebert, et al.
Veröffentlicht: (2025)

Novel Creep–Fatigue Interaction Model Based on Kitagawa–Takahashi and a Probabilistic Creep Pore Model
von: Tuan Duc Nguyen, et al.
Veröffentlicht: (2025)

Fatigue and Fracture Behavior in Advanced Layer‐Level SS316L‐17‐4PH Multi‐Material Fabrication via Powder Bed Fusion—Laser Beam
von: Vito Errico, et al.
Veröffentlicht: (2025)

Assessing the Very High Cycle Fatigue Behavior and Frequency Effect of Structural Steel Welds
von: Andrew England, et al.
Veröffentlicht: (2025)

Natural Seawater Impact on Crack Propagation and Fatigue Behavior of Welded Nickel Aluminum Bronze
von: T. H. E. Dobson, et al.
Veröffentlicht: (2024)

Fatigue Fracture Mechanism and Life Prediction of TA1 Titanium Alloy Clinched Joints
von: Yue Zhang, et al.
Veröffentlicht: (2024)

Stress‐Based Fracture Model to Describe Ductile Fracture Behavior in Various Stress States
von: Pengfei Wu, et al.
Veröffentlicht: (2024)

Study on Creep Damage Behaviors and Model of Rock Mass During Excavation and Unloading Under High Seepage Pressure
von: Lili Chen, et al.
Veröffentlicht: (2025)

A Unified Temperature‐Dependent Constitutive Model for Haynes 230 Alloy for High Temperature Fatigue and Creep Analysis
von: Rou Du, et al.
Veröffentlicht: (2026)

The Mechanical Performance of Resistance Welded Thermoplastic Composite Double Overlap Joint Tested Under Static and Fatigue Loading
von: Piotr Kowalczyk, et al.
Veröffentlicht: (2024)