Buchumschlag

Influences of Welding Techniques on Fatigue Behaviors of Thick‐Walled Cylinders of 30CrMnSiNi2A Steel

Fuente: Wiley Open Access

Gespeichert in:

Bibliographische Detailangaben
Hauptverfasser:	Jian Long, Lin‐Jie Zhang, Miao‐Xia Xie, Suck Joo Na
Format:	Artículo Open Access
Veröffentlicht:	Wiley 2025
Schlagworte:	Fatigue & Fracture of Engineering Materials & Structures
Online-Zugang:	Acceder al recurso
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!

Ähnliche Einträge

Influence of Retained Austenite on the Fatigue Crack Growth Behavior of C‐Si‐Mn TRIP Steel
von: Zilong Wang, et al.
Veröffentlicht: (2025)

Assessing the Very High Cycle Fatigue Behavior and Frequency Effect of Structural Steel Welds
von: Andrew England, et al.
Veröffentlicht: (2025)

Fatigue Behavior of Al/Steel Dissimilar Friction Stir Welds and the Effect of Die‐Press Forming
von: Yoshihiko Uematsu, et al.
Veröffentlicht: (2024)

Influence of Different Notch Insertion Methods on the Fatigue Behavior of Metastable Cr‐Ni‐Cu‐N and AISI 316L Austenitic Stainless Steels
von: Pia Nitzsche, et al.
Veröffentlicht: (2025)

Comprehensive Investigations of Fracture and Fatigue Properties for 10CrNi3MoV Steel at Low Temperatures
von: Wei Song, et al.
Veröffentlicht: (2025)

Medium‐Cycle Fatigue Behavior of Three Metallic Materials and a Welded Steel Following Gaseous Hydrogen Soaking
von: E. Kufoin, et al.
Veröffentlicht: (2026)

Simulation and Experiment on Repair Welding Maintenance of Orthotropic Steel Deck Fatigue Failure
von: Ping Wang, et al.
Veröffentlicht: (2025)

Fatigue Behavior and Inclusion‐Based Lifetime Prediction of 42CrMo4 Steel
von: Thomas Kirste, et al.
Veröffentlicht: (2025)

Influence of the Loading Frequency on Very High Cycle Fatigue Behavior of Structural Steels
von: M. C. Teixeira, et al.
Veröffentlicht: (2024)

An Investigation on Fatigue Strengthening Mechanism of 316L Stainless Steel Welded Joint by Surface Mechanical Rolling Treatment
von: Weiya Jin, et al.
Veröffentlicht: (2025)

Natural Seawater Impact on Crack Propagation and Fatigue Behavior of Welded Nickel Aluminum Bronze
von: T. H. E. Dobson, et al.
Veröffentlicht: (2024)

Fatigue Behavior Up to Very High Cycle Regime of Laser Beam Welded Ti60 Joints
von: Lisha Ren, et al.
Veröffentlicht: (2025)

The Effect of Ultrasonic Surface Rolling Process on Corrosion Fatigue Performance of 2Cr13 Steel
von: Jun Cheng, et al.
Veröffentlicht: (2025)

Submerged Arc Welding of S355G10+M Steel: Analyzing Strength, Distortion, Residual Stresses, and Fatigue for Offshore Wind Applications
von: Victor Okenyi, et al.
Veröffentlicht: (2025)

Multi‐Dimensional Influence Surface‐Based Analysis on Fatigue Strength of Semi‐Open‐Rib to Deck Welded Joints in OBD
von: Haibo Yang, et al.
Veröffentlicht: (2025)

Influence of Specimen Thickness on Fatigue Crack Growth at High Temperature Under Mixed‐Mode Loading
von: Chun Hu, et al.
Veröffentlicht: (2025)

Effect of Network Structure Morphology on Fatigue Crack Propagation in Sintered Compact Composed of High‐Entropy Alloy CrMnFeCoNi and 304SS
von: Arisa Ito, et al.
Veröffentlicht: (2024)

In Situ Observation via Active Infrared Thermography for Fatigue Damage of Dissimilar Heat‐Welded Joints by Friction Stir Spot Welding
von: Yuki Ogawa, et al.
Veröffentlicht: (2025)

The Dual Role of Nb Microalloying on the High‐Cycle Fatigue of 1.0%C–1.5%Cr Bearing Steel
von: Yongjin Wu, et al.
Veröffentlicht: (2024)

Influence Mechanism of Rare Earth Inclusions on Fatigue Crack Initiation and Propagation of Heavy Rail Steel
von: Yaodong Cen, et al.
Veröffentlicht: (2025)

Proposing a New Crack Driving Force Parameter for Fatigue Crack Growth Rate of C–Mn Steel
von: Prakash Bharadwaj, et al.
Veröffentlicht: (2025)

Fatigue Performance Investigations for 40Cr Steel via Traditional Frequency Loading, Ultrasonic Frequency Loading, and Infrared Thermography Method
von: Bing Liu, et al.
Veröffentlicht: (2025)

Influence of Aging Treatment on the Fatigue Behavior and Fracture Mechanism of SiCp/Al Composites Under Multiaxial Proportional and Non‐Proportional Loadings
von: Yinfu Liu, et al.
Veröffentlicht: (2025)

Tests and Analyses to Study Monotonic and Cyclic Fracture Behavior of C‐Mn Steel
von: Prakash Bharadwaj, et al.
Veröffentlicht: (2026)

Study of Fatigue Crack Initiation in 316 Stainless Steel
von: O. Benabdeljalil, et al.
Veröffentlicht: (2025)

Effect of Laser Scanning Speed on Tensile and Fatigue Behavior of LPBF‐Printed Co‐Cr‐Mo Alloy
von: Vinod Kumar Jat, et al.
Veröffentlicht: (2025)

Correction to “Precision Fatigue Life Prediction for Cast Iron Engine Cylinder Blocks Using Machine Learning”
Veröffentlicht: (2026)

Effect of Strain Gradients on Fatigue Life of C‐Mn Steel Notched Tubes Under Axial and Torsion Loads: Tests and Analyses
von: Shreebanta Kumar Jena, et al.
Veröffentlicht: (2025)

Effect of Welding, Aging, and Stress Ratio on Fatigue of GMAW and FSW AA 6061‐T651 Joints
von: Hemendra Kumar Srivastava, et al.
Veröffentlicht: (2026)

An Engineering Prediction Model on Fatigue Life of Welded Joints Under Cavitation Water Peening Treatment
von: Yun Luo, et al.
Veröffentlicht: (2026)

Quantitative Review of Critical Plane Criteria and Stress Analysis Approaches for Multiaxial Fatigue of Welded Joints
von: Chin Tze Ng, et al.
Veröffentlicht: (2025)

Study on the High‐Cycle Fatigue and Fatigue Crack Growth Behavior of Al–Si–Mg Alloy: Pore Size and Stress Ratio Effects
von: He‐Fei Li, et al.
Veröffentlicht: (2025)

Creep Behavior and Fracture Mechanisms of the Dissimilar Inertia Friction Welded Joints of Deformed and Powder Metallurgy Ni‐Based Superalloys
von: Zixin Zhang, et al.
Veröffentlicht: (2024)

Fatigue Cracking Evolution in H13 Cr‐Mo Steel Under UNSM Treatment: Comparative Analysis of Surface MSFCs and Internal Fisheye Cracks
von: Nahm Seung Hoon, et al.
Veröffentlicht: (2025)

Compared Influence of a Lubricant on Mode I and Mode II Fatigue Crack Growth Kinetics in a Gear Steel
von: Véronique Doquet, et al.
Veröffentlicht: (2024)

Fatigue Behavior and Fracture Mechanism of 310S Austenitic Stainless Steel Processed by Surface Mechanical Rolling Treatment at 650°C
von: Y. G. Wang, et al.
Veröffentlicht: (2025)

Load Sequence Effects on Fatigue Behavior of AISI 304 Stainless Steel Under Nonproportional Multiaxial Variable Amplitude Loading
von: Yu‐Chen Wang, et al.
Veröffentlicht: (2025)

Study on the Thermochemical Erosion Mechanism and Fatigue Behavior of Gun Steel Under High‐Temperature and High‐Pressure Gas Environment
von: An Chen, et al.
Veröffentlicht: (2026)

Unconventional Defect‐Shape Dependence of Fatigue Limit in Martensitic Steel
von: Takahiro Chiba, et al.
Veröffentlicht: (2026)

Advancement of IIW Fatigue Design Concepts by Applying the Peak Stress Method to Offshore Welded K‐Nodes
von: G. Meneghetti, et al.
Veröffentlicht: (2025)