Copertina

Fatigue Assessment of Precorroded AlSi9Cu3 Specimens Incorporating Short Crack Propagation

Fuente: Wiley Open Access

Salvato in:

Dettagli Bibliografici
Autori principali:	Peter Oberreiter, Markus Schönowitz, Bernd Maier, Florian Grün
Natura:	Artículo Open Access
Pubblicazione:	Wiley 2025
Soggetti:	Fatigue & Fracture of Engineering Materials & Structures
Accesso online:	Acceder al recurso
Tags:	Aggiungi Tag Nessun Tag, puoi essere il primo ad aggiungerne!!

Documenti analoghi

Predicting the Size‐Dependent Fatigue Strength Distributions in Additively Manufactured AlSi10Mg Alloy Specimens Using Extreme Value Statistics
di: Tomasz Tomaszewski, et al.
Pubblicazione: (2026)

Fatigue life prediction of additively manufactured AlSi10Mg based on surface roughness and residual stress
di: Lea Strauß, et al.
Pubblicazione: (2024)

Analysis of Fatigue Crack Propagation With Multiple Mechanisms
di: Daniel Kujawski
Pubblicazione: (2026)

Fatigue Behavior and Life Prediction of Additively Manufactured AlSi10Mg up to 108 Cycles Under Rotating Bending
di: Zhonghua Jiang, et al.
Pubblicazione: (2025)

Multicale Study of the Fatigue Life of AlSi10Mg Material Produced by Laser Powder Bed Fusion (LPBF) Method: Experimental and Computational
di: Kiarash Jamali Dogahe, et al.
Pubblicazione: (2025)

Mechanisms and Damage‐Based Assessment of Time‐Dependent Fatigue Crack Propagation in Polymer Electrolyte Membrane
di: Liang Cai, et al.
Pubblicazione: (2025)

Influence of Specimen Thickness on Fatigue Crack Growth at High Temperature Under Mixed‐Mode Loading
di: Chun Hu, et al.
Pubblicazione: (2025)

Investigation of Fatigue Mechanics and Crack Evolution Characteristics of Jointed Specimens Under Cyclic Uniaxial Compression
di: Miao Chen, et al.
Pubblicazione: (2024)

Analyses of XFEM and VCCT for Fatigue Crack Propagation in Thick Cracked Panels Repaired With CFRP Composites
di: Sajjad Barzegar Khanaposhtani, et al.
Pubblicazione: (2025)

Study on the High‐Cycle Fatigue and Fatigue Crack Growth Behavior of Al–Si–Mg Alloy: Pore Size and Stress Ratio Effects
di: He‐Fei Li, et al.
Pubblicazione: (2025)

A Fatigue Performance Analysis Framework for Evaluating Fatigue Behavior in Metallic Materials: From Notch Fatigue to Crack Propagation
di: Xing Yang, et al.
Pubblicazione: (2025)

Numerical Assessment of Fatigue Damage Evolution at the Crack tip in AA2099 Al–Li Alloy Sheet
di: Mengdi Li, et al.
Pubblicazione: (2025)

Effect of corrosion pit on fatigue damage and failure in powder bed fusion AlSi10Mg
di: Haipeng Song, et al.
Pubblicazione: (2024)

Natural Seawater Impact on Crack Propagation and Fatigue Behavior of Welded Nickel Aluminum Bronze
di: T. H. E. Dobson, et al.
Pubblicazione: (2024)

Fatigue Criticality Assessment of Volumetric Defects in Notched Specimens: A Non‐Destructive Approach
di: Arun Poudel, et al.
Pubblicazione: (2025)

Fatigue Crack Initiation and Propagation in UNSM‐Treated Biomedical Ti–6Al–4V ELI Alloy: Role of Fisheye and Surface Crack Coalescence Under RFT and AFT Loading
di: Seung Hoon Nahm, et al.
Pubblicazione: (2026)

On the notch sensitivity of as‐built Laser Beam Powder Bed–Fused AlSi10Mg specimens subjected to Very High Cycle Fatigue tests at ultrasonic frequency up to 109 cycles
di: Andrea Tridello, et al.
Pubblicazione: (2024)

Influence Mechanism of Rare Earth Inclusions on Fatigue Crack Initiation and Propagation of Heavy Rail Steel
di: Yaodong Cen, et al.
Pubblicazione: (2025)

Effect of Trace Sc Addition on Aging Precipitation and Fatigue Crack Propagation Behavior of 7085 Alloy
di: Qianqian Ren, et al.
Pubblicazione: (2025)

Fatigue Short Crack Growth Prediction of Additively Manufactured Alloy Based on Ensemble Learning
di: Qinghui Huang, et al.
Pubblicazione: (2025)

Prediction of Rubber Fatigue Life Using an Assimilation‐based Learning Approach and Incremental Crack Propagation Model
di: Congzhuo Fang, et al.
Pubblicazione: (2024)

A Fatigue Short Crack Path Prediction Criterion Based on Improved Energy Release Rate
di: Pengxue Ma, et al.
Pubblicazione: (2026)

Influence of Retained Austenite on the Fatigue Crack Growth Behavior of C‐Si‐Mn TRIP Steel
di: Zilong Wang, et al.
Pubblicazione: (2025)

Impact Toughness and Fatigue Crack Propagation in Carbide‐Free Bainite: The Adverse Role of Retained Austenite and Martensite‐Austenite Islands
di: Oguz Gulbay, et al.
Pubblicazione: (2025)

Fatigue Crack Propagation Life of Metallic Materials Under Random Loading: A Coupling Analysis Method in the Frequency Domain
di: Dingkun Fu, et al.
Pubblicazione: (2024)

Mechanism of Fatigue Failure Anisotropy of Extruded Al‐Cu‐Li Alloy
di: Jianwei Yang, et al.
Pubblicazione: (2025)

A Macro‐Mesoscopic Life Prediction Method of the Fatigue Short Crack in Turbine Disks Based on CP‐XFEM
di: Bin Xie, et al.
Pubblicazione: (2025)

Fatigue Crack Nucleation and Growth in Recrystallized Annealed Ti‐6Al‐4V Combat Aircraft Structures
di: I. Field, et al.
Pubblicazione: (2026)

Fatigue Crack Growth Modeling: Effect of the Stress State on Fatigue Enhanced by Microvoid Damage
di: E. R. Sérgio, et al.
Pubblicazione: (2025)

Study of Fatigue Crack Initiation in 316 Stainless Steel
di: O. Benabdeljalil, et al.
Pubblicazione: (2025)

Investigation on the Small Fatigue Crack Propagation Behavior of TC4‐ELI Titanium Alloy With Different Microstructures Under Various Stress Ratios
di: Zhuowu Wang, et al.
Pubblicazione: (2026)

Strain Field Visualization During Fatigue Crack Growth in Microstructure Tailored LPBF Ti‐6Al‐4V
di: Roger Beal, et al.
Pubblicazione: (2025)

Strain Gauge Method to Measure Crack Initiation for Nickel–Aluminum Bronze Specimens in Artificial Seawater
di: Pengyu Wei, et al.
Pubblicazione: (2025)

Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography
di: Bardia Hejazi, et al.
Pubblicazione: (2024)

Proposing a New Crack Driving Force Parameter for Fatigue Crack Growth Rate of C–Mn Steel
di: Prakash Bharadwaj, et al.
Pubblicazione: (2025)

Effects of Ion Irradiation on Stage II Fatigue Crack Growth and Plasticity
di: Melissa Weihrauch, et al.
Pubblicazione: (2024)

A Two‐Scale Model of Fretting Fatigue Crack Initiation Life Based on Long Short‐Term Memory Networks Improved by Genetic Algorithm
di: Yazhou Xu, et al.
Pubblicazione: (2024)

Effect of Network Structure Morphology on Fatigue Crack Propagation in Sintered Compact Composed of High‐Entropy Alloy CrMnFeCoNi and 304SS
di: Arisa Ito, et al.
Pubblicazione: (2024)

Analysis of Crack‐Tip Field in Orthotropic Compact Tension Shear Specimens: The Role of Elastic Mode Mixity and T ‐Stress
di: Pengfei Jin, et al.
Pubblicazione: (2025)

Enhanced Functional Fatigue Resistance of Cu‐Al‐Mn Superelastic Wire Bamboo‐Like Grain Structure
di: Xiangbo Zu, et al.
Pubblicazione: (2024)