COMPRESSIVE BEHAVIOUR OF CONCRETE CYLINDER CONFINED BY NATURAL FIBER REINFORCED POLYMER SHEET

ASSESSING THE FATIGUE RESPONSE OF GLASS FIBER REINFORCED SUSTAINABLE POLYMER MATRIX COMPOSITES
by: Jayaram Pothnis, et al.
Published: (2023)

FEATURES OF POLYMER IMPREGNATION IN CONCRETE
by: AUESBEK SULTAN TEMIRBEKULY, et al.
Published: (2026)

FIBER REINFORCED PIEZOELECTRIC COMPOSITES
by: Christopher C. Bowland, et al.
Published: (2015)

THERMAL STRESSES IN FIBER REINFORCED COMPOSITES
by: George Zhenghong Zhu, et al.
Published: (2013)

DEGREDATION PROPERTIES OF REINFORCED CONCRETE WALLS WITH OPENINGS
by: JULIAN CARRILLO
Published: (2011)

MICROWAVE INDUCED DEGRADATION OF GLASS FIBER REINFORCED POLYESTER FOR FIBER AND RESIN RECOVERY
by: Hulya U. Sokoli, et al.
Published: (2015)

LOCAL FAILURE PROCESSES IN FIBER REINFORCED POLYMERS
by: C. Marotzke, et al.
Published: (2009)

DUCTILITY RESPONSE OF HYBRID FIBRE REINFORCED CONCRETE BEAMS
by: Eswari Natarajan
Published: (2017)

HORIZONTAL CYLINDER-IN-CYLINDER BUCKLING UNDER COMPRESSION AND TORSION: REVIEW AND CONSIDERATIONS FOR COMPOSITE APPLICATIONS
by: Nathan Wicks, et al.
Published: (2005)

IN-PLANE SHEAR BEHAVIOR OF FIBER-REINFORCED AND TAPE-REINFORCED UHMWPE LAMINATES: EXPERIMENTAL STUDY
by: Vivek Kumar, et al.
Published: (2023)

MECHANICAL RECYCLING OF HIGH-PERFORMANCE FIBER REINFORCED POLYPHTHALAMIDE
by: Morgan Chamberlain, et al.
Published: (2023)

INVESTIGATION OF OPTIMAL RATIO OF HYBRID FIBRE CONCRETE WITH STEEL AND POLYPROPYLENE FIBRES FOR ENHANCED COMPRESSIVE STRENGTH
by: University of Engineering and Technology Taxila, et al.
Published: (2024)

THE EFFECT OF FIBER CUTS ON THE TENSILE BEHAVIOR OF HYBRID CARBON FIBER-SELF-REINFORCED POLYPROPYLENE COMPOSITES
by: Yannick Meerten, et al.
Published: (2015)

ANALYSIS, PLANNING AND CONSTRUCTION TECHNIQUES FOR REINFORCED CONCRETE BERTHING STRUCTURES
by: G. Tirupathi Naidu1 , G. Giridhar2 , CH. Narendra3 , M. Chaitnaya4 , K. Venkateswarao5 , Y. Ganesh6
Published: (2026)

FIBRE REINFORCED SPRAY CONCRETE FOR COMPLIANCE WITH SITE SAFETY REQUIREMENT
by: B. de Rivaz
Published: (2011)

LOW VELOCITY IMPACT OF ELECTRIFIED CARBON FIBER POLYMER MATRIX COMPOSITES
by: Sierakowski R. L., et al.
Published: (2007)

MACHINING QUALITY OF CARBON FIBER REINFORCED PLASTICS WITH DIFFERENT DRILLS
by: Y. Chen, et al.
Published: (2011)

MECHANICAL BEHAVIOR OF CARBON/STEEL HYBRID FIBER-REINFORCED COMPOSITES
by: Minchang Sung, et al.
Published: (2017)

EXPERIMENTAL STUDY OF SHEAR BEHAVIOR OF REINFORCED CONCRETE BEAM-COLUMN JOINTS
by: Ihsanul Amal, et al.
Published: (2026)

TENSILE STRENGTH MODELING OF GLASS FIBER-POLYMER COMPOSITES AND SANDWICH MATERIALS IN FIRE
by: Stefanie Feih, et al.
Published: (2013)

TENSILE BEHAVIOUR OF CARBON FIBRE COMPOSITES HYBRIDISED WITH SELF-REINFORCED POLYPROPYLENE
by: Yentl Swolfs, et al.
Published: (2013)

DEVELOPMENT OF A PLEASURE BOAT USING BAMBOO FIBER REINFORCED PLASTICS
by: Ryusuke TANAKA, et al.
Published: (2007)

INFLUENCE OF THE INTERFACE STRENGHT ON LOCAL FAILURE PROCESSES IN FIBER REINFORCED COMPOSITES
by: C. Marotzke, et al.
Published: (1999)

BIOMIMETIC NANO-COMPOSITE ACTUATOR BASED ON FULLERENE-REINFORCED NAFION IONIC POLYMER
by: J H Jung, et al.
Published: (2009)

STUDY ON THE MECHANICAL AND ELECTRICAL PROPERTIES AND CREEP BEHAVIOUR OF CARBON FIBER NANO-COMPOSITES
by: Yi-Luen LI, et al.
Published: (2009)

ASSESSMENT OF DISPLACEMENTS IN REINFORCED CONCRETE BUILDINGS FOR THE OPERATION OF 5G ANTENNAS IN CHILE
by: Felipe Valdivia-Cortés
Published: (2020)

A DISPLACEMENT-BASED DESIGN METHOD FOR MEDIUM-RISE REINFORCED CONCRETE WALLS
by: HECTOR URREGO
Published: (2010)

CURE MONITORING OF UV CHAIN CURING POLYMER BY FIBER OPTIC MEASUREMENT OF REFRACTIVE INDEX
by: Tatsuro Kosaka, et al.
Published: (2007)

NON-LINEAR BEHAVIOUR OF PLAIN WEFT-KNITTED CARBON FIBRE REINFORCED COMPOSITES
by: J. de Haan, et al.
Published: (1999)

SIC-ZRB2 FIBER-REINFORCED COMPOSITES PREPARED BY SPARK PLASMA SINTERING
by: S-H Lee, et al.
Published: (2009)

SCREW AND NAIL HOLDING PROPERTIES OF PLYWOOD PANELS REINFORCED WITH GLASS FIBER FABRIC
by: Bekir Cihad Bal
Published: (2017)

DEEP LEARNING-BASED CRACK DETECTION AND STRUCTURAL DEFECT MAPPING IN REINFORCED CONCRETE SYSTEMS
by: Dr. SriSudha Garugu, Dr. Tadi Chandrasekhar, Vikas Gulati, Dr. Aasheesh Raizada, Anup Saxena, Dr. Vimal Bibhu, Ranjan Banerjee
Published: (2026)

INFLUENCE OF THE STORY STIFFNESS OF REINFORCED CONCRETE FRAME WITH PROPORTIONAL HYSTERETIC DAMPERS ON THE SEISMIC RESPONSE
by: Juan Andrés Oviedo
Published: (2012)

3D PRINTING AND IN-SITU THERMAL CURING OF CONTINUOUS FIBER-REINFORCED THERMOSET COMPOSITES
by: Carter Dojan, et al.
Published: (2023)

PERMEABILITY EVALUATION IN VACUUM-ASSISTED RESIN TRANSFER MOLDING OF CARBON FIBER REINFORCED PLASTICS
by: Fumiya Isono, et al.
Published: (2019)

STRUCTURES OF PRECAST REINFORCED CONCRETE LININGS OF DISTILLING TUNNELS CONSTRUCTED BY THE SHIELD METHOD OF THE HERRENKNECHT COMPANY
by: Sayyidjabbor S.Sayyidqosimov, et al.
Published: (2025)