FTIR, TGA/DSC, BET, and WCA analyses of materials, as well as effects of parameters on isolating cellulose fibers from reed
Fuente:
Zenodo
Salvato in:
| Autori principali: | , , |
|---|---|
| Natura: | Recurso digital |
| Pubblicazione: |
Zenodo
2024
|
| Soggetti: | |
| Accesso online: | |
| Tags: |
Aggiungi Tag
Nessun Tag, puoi essere il primo ad aggiungerne!!
|
| _version_ | 1866901925929156608 |
|---|---|
| author | Le Thi Thanh, Huong Tran, Hoang Huu Tran Nguyen Minh, An |
| author_facet | Le Thi Thanh, Huong Tran, Hoang Huu Tran Nguyen Minh, An |
| contents | <p>This study focused on fabricating a cellulose aerogel for oil spill cleanup, using common reed (<em>Phragmites australis</em>) as the cellulose source. The process involved isolating cellulose from reed via traditional Kraft pulping, considering the effects of key factors on the isolated cellulose content. After a two-stage HP bleaching sequence, the highest cellulose content achieved was 27.2%, with 80% ISO brightness and 1% ash content under mild Kraft pulping conditions of 30% sulfidity, 20% active alkali, sustained cooking at 165°C for 3 hours, and a liquor-to-reed ratio of 8:1. Subsequently, reed-based cellulose aerogel was fabricated via a freeze-drying method using an eco-friendly NaOH/PEG aqueous solvent system, which was then modified with methyltrimethoxysilane (MTMS). The resulting aerogel exhibited remarkable characteristics, including a low density of 0.04 g/cm³, high porosity of 96%, high hydrophobicity with a water contact angle (WAC) of 141°, and a superior crude oil adsorption capacity of 35 g/g. Comprehensive characterizations of the fabricated materials, including SEM, FTIR, TGA/DSC, and WAC measurements, were evaluated. This interdisciplinary study explores the commercial promise of reed-based cellulose aerogel as a sustainable solution for oil spill cleanup efforts.</p> |
| format | Recurso digital |
| id | zenodo_https___doi_org_10_5281_zenodo_15801550 |
| institution | Zenodo |
| language | |
| publishDate | 2024 |
| publisher | Zenodo |
| record_format | zenodo |
| spellingShingle | FTIR, TGA/DSC, BET, and WCA analyses of materials, as well as effects of parameters on isolating cellulose fibers from reed Le Thi Thanh, Huong Tran, Hoang Huu Tran Nguyen Minh, An Aerogel reed Kraft pulping Cellulose MTMS crude oil absorption <p>This study focused on fabricating a cellulose aerogel for oil spill cleanup, using common reed (<em>Phragmites australis</em>) as the cellulose source. The process involved isolating cellulose from reed via traditional Kraft pulping, considering the effects of key factors on the isolated cellulose content. After a two-stage HP bleaching sequence, the highest cellulose content achieved was 27.2%, with 80% ISO brightness and 1% ash content under mild Kraft pulping conditions of 30% sulfidity, 20% active alkali, sustained cooking at 165°C for 3 hours, and a liquor-to-reed ratio of 8:1. Subsequently, reed-based cellulose aerogel was fabricated via a freeze-drying method using an eco-friendly NaOH/PEG aqueous solvent system, which was then modified with methyltrimethoxysilane (MTMS). The resulting aerogel exhibited remarkable characteristics, including a low density of 0.04 g/cm³, high porosity of 96%, high hydrophobicity with a water contact angle (WAC) of 141°, and a superior crude oil adsorption capacity of 35 g/g. Comprehensive characterizations of the fabricated materials, including SEM, FTIR, TGA/DSC, and WAC measurements, were evaluated. This interdisciplinary study explores the commercial promise of reed-based cellulose aerogel as a sustainable solution for oil spill cleanup efforts.</p> |
| title | FTIR, TGA/DSC, BET, and WCA analyses of materials, as well as effects of parameters on isolating cellulose fibers from reed |
| topic | Aerogel reed Kraft pulping Cellulose MTMS crude oil absorption |
| url | https://doi.org/10.5281/zenodo.15801550 |