Salvato in:
| Autore principale: | |
|---|---|
| Natura: | Recurso digital |
| Lingua: | |
| Pubblicazione: |
Zenodo
2026
|
| Accesso online: | https://doi.org/10.5281/zenodo.19109150 |
| Tags: |
Aggiungi Tag
Nessun Tag, puoi essere il primo ad aggiungerne!!
|
| _version_ | 1866901610759716864 |
|---|---|
| author | OUDJANI, Brahim |
| author_facet | OUDJANI, Brahim |
| contents | <p>The vibration data of the analyzed bearings in this study are provided by the test bench of the Unit URMM-CRTI ex URMA-CRTI. The test bench consists of a three-phase 0.37 Kw induction motor, a speed drive system, and bearings in different states. The tested bearing supports the drive side motor shaft; three ICP industrial accelerometers (CTC AC 140-2D) with a sensitivity of 100 mV/g are used. A variable speed drive, Lenze ESV371N01SXB is used to control the speed of the AC motor, and the vibration signal is acquired at the following speeds: 30, 35, 40, 45, and 50 Hz. The vibration signal data is analyzed and stored using the VibraQuest software ( VQ-DT8) with a sampling frequency of 25.6 kHz and an acquisition time of 10 s for each operating condition. The considered bearing faults cover the defects of the outer race, the inner race, the rolling ball, and the combined fault.</p> |
| format | Recurso digital |
| id | zenodo_https___doi_org_10_5281_zenodo_19109150 |
| institution | Zenodo |
| language | |
| publishDate | 2026 |
| publisher | Zenodo |
| record_format | zenodo |
| spellingShingle | URMA-CRTI dataset for rolling element bearing vibration data OUDJANI, Brahim <p>The vibration data of the analyzed bearings in this study are provided by the test bench of the Unit URMM-CRTI ex URMA-CRTI. The test bench consists of a three-phase 0.37 Kw induction motor, a speed drive system, and bearings in different states. The tested bearing supports the drive side motor shaft; three ICP industrial accelerometers (CTC AC 140-2D) with a sensitivity of 100 mV/g are used. A variable speed drive, Lenze ESV371N01SXB is used to control the speed of the AC motor, and the vibration signal is acquired at the following speeds: 30, 35, 40, 45, and 50 Hz. The vibration signal data is analyzed and stored using the VibraQuest software ( VQ-DT8) with a sampling frequency of 25.6 kHz and an acquisition time of 10 s for each operating condition. The considered bearing faults cover the defects of the outer race, the inner race, the rolling ball, and the combined fault.</p> |
| title | URMA-CRTI dataset for rolling element bearing vibration data |
| url | https://doi.org/10.5281/zenodo.19109150 |