Guardado en:
Detalles Bibliográficos
Autor principal: Nurzod Yunusov
Formato: Recurso digital
Lenguaje:
Publicado: Zenodo 2026
Acceso en línea:https://doi.org/10.5281/zenodo.19130330
Etiquetas: Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
_version_ 1866901979926626304
author Nurzod Yunusov
author_facet Nurzod Yunusov
contents <p>A grate with an improved design was developed to effectively clean fibers produced from high- and low-ginning cotton varieties during ginning, thereby enhancing fiber quality. The manufactured grate was installed on a 5DP-130 gin at the Uychi Cotton Cleaning Plant of “Uchkurgan Textile” LLC, improving the gin, and comparative tests were conducted with a 5DP-130 gin equipped with the existing grate design using Namangan-77 cotton varieties I and III.</p> <p>In the tests, in the 5DP-130 gin equipped with the proposed grate, the mass fraction of defective fibers and impurities in fibers cleaned during ginning of I and III varieties averaged 3.14% and 3.95%<strong>,</strong> respectively, which was reduced by<strong> </strong>0.13% (abs.) and 0.24% (abs.) compared to the fibers cleaned by the gin with the existing grate. During fiber cleaning, the fiber content in the waste decreased on average from 2.3% to 2.7% (abs.)<strong>,</strong> and the cleaning efficiency increased by an average of 3.7% (abs.) and 4.2% (abs.) compared to the existing gin.</p> <p>After ginning, when fibers were further cleaned using a 1VPU fiber cleaner, the mass fraction of defective fibers and impurities in the cleaned fibers averaged 2.0% and 2.96%<strong>,</strong> respectively, which showed an improvement of 0.14% (abs.)<strong> </strong>and 0.18% (abs.) in quality compared to fibers produced using a 1VPU cleaner after the gin with the existing grate. According to the O’zDst 632:2010 state<strong> </strong>standard, varieties I and III corresponded to the “Excellent” class<strong>.</strong></p> <p>The results of the study showed that improving the 5DP-130 gin with a new grate design leads to enhanced fiber quality during ginning, a reduction in waste fiber content, and an overall increase in cleaning efficiency of the roller gin.</p>
format Recurso digital
id zenodo_https___doi_org_10_5281_zenodo_19130330
institution Zenodo
language
publishDate 2026
publisher Zenodo
record_format zenodo
spellingShingle TEST RESULTS OF THE IMPROVED 5DP-130 MODEL GIN IN PRODUCTION
Nurzod Yunusov
<p>A grate with an improved design was developed to effectively clean fibers produced from high- and low-ginning cotton varieties during ginning, thereby enhancing fiber quality. The manufactured grate was installed on a 5DP-130 gin at the Uychi Cotton Cleaning Plant of “Uchkurgan Textile” LLC, improving the gin, and comparative tests were conducted with a 5DP-130 gin equipped with the existing grate design using Namangan-77 cotton varieties I and III.</p> <p>In the tests, in the 5DP-130 gin equipped with the proposed grate, the mass fraction of defective fibers and impurities in fibers cleaned during ginning of I and III varieties averaged 3.14% and 3.95%<strong>,</strong> respectively, which was reduced by<strong> </strong>0.13% (abs.) and 0.24% (abs.) compared to the fibers cleaned by the gin with the existing grate. During fiber cleaning, the fiber content in the waste decreased on average from 2.3% to 2.7% (abs.)<strong>,</strong> and the cleaning efficiency increased by an average of 3.7% (abs.) and 4.2% (abs.) compared to the existing gin.</p> <p>After ginning, when fibers were further cleaned using a 1VPU fiber cleaner, the mass fraction of defective fibers and impurities in the cleaned fibers averaged 2.0% and 2.96%<strong>,</strong> respectively, which showed an improvement of 0.14% (abs.)<strong> </strong>and 0.18% (abs.) in quality compared to fibers produced using a 1VPU cleaner after the gin with the existing grate. According to the O’zDst 632:2010 state<strong> </strong>standard, varieties I and III corresponded to the “Excellent” class<strong>.</strong></p> <p>The results of the study showed that improving the 5DP-130 gin with a new grate design leads to enhanced fiber quality during ginning, a reduction in waste fiber content, and an overall increase in cleaning efficiency of the roller gin.</p>
title TEST RESULTS OF THE IMPROVED 5DP-130 MODEL GIN IN PRODUCTION
url https://doi.org/10.5281/zenodo.19130330